utility/hunting knife work in progress

MJ. · Post by **MJ.** » Wed Nov 05, 2014 11:35 am

just finished rough shaping the handle on this hunter, a composite of black g10 and black linen micarta. the g10 replaces some of the tang to reduce weight but leaves it stronger than a stick tang. once sanded the g10 should blend in with the micarta.

MJ. · Post by **MJ.** » Wed Nov 05, 2014 4:48 pm

have finished sanding... sheaths next, though im not sure what to do about the hunter... it wants a decent leather sheath unfortunately leather aint my strong point...

neverready · Post by **neverready** » Wed Nov 05, 2014 7:02 pm

Great work!

You're giving me knife G.A.S

Smudge · Post by **Smudge** » Wed Nov 05, 2014 7:49 pm

Beautiful workmanship, if I say I've got wood do you promise not to baton it?

MJ. · Post by **MJ.** » Fri Nov 07, 2014 4:27 pm

just finishing up the sheaths for these two, 2mm olive kydex. the leather belt loops will be added later as are still drying after a bit of wet forming.

munchh · Post by **munchh** » Wed Nov 12, 2014 8:59 am

Wow, you do some great work I love that spine! They much nicer than the nato, the one your doing will be alot nicer if these are anything to go by.

simwolfe · Post by **simwolfe** » Wed Nov 19, 2014 2:32 am

Great sheath ever. Amazingly beautiful.

_______________
Believe me nunchaku still exist.

munchh · Post by **munchh** » Wed Nov 19, 2014 9:34 am

The thread caught up, may have been my tablet?

uk-preppers.co.uk

utility/hunting knife work in progress

utility/hunting knife work in progress

Re: utility/hunting knife work in progress

Re: utility/hunting knife work in progress

Re: utility/hunting knife work in progress

Re: utility/hunting knife work in progress

Re: utility/hunting knife work in progress

Re: utility/hunting knife work in progress

Re: utility/hunting knife work in progress