bioethanol fireplace

Homes and Retreats
Post Reply
Yorkshire Andy
Posts: 4069
Joined: Thu Oct 03, 2013 4:06 pm

bioethanol fireplace

Post by Yorkshire Andy » Fri Oct 11, 2019 9:41 am

Got this project underway. Chimney has been capped so a open fire was a none starter without scaffolding. So for now.. I've gone bio ethanol

Burner came off Amazon

I removed the free standing electric fireplace and removed the wall paper and hardboard (yes hardboard sheet revealing the old fireplace,

Nice lintle above so.. 2*2 battern round the chimney hole and plasterboard sheet followed by dry lining the opening

Then built a plasterboard ledge plastered the underside before fitting in place adding a metal bowl under the burner as a fail safe containment for the bioethanol should the burner leak then plastered the lot allowed to dry

Tiled the ledge and back just need to paint the sides.. metal deflector plate above to protect the top lining (Morrisons baking sheet) after an hour's burn it only got to 80°c with my thermo gun). Behind the decorative log slivers there is a 15mm hole so incase of a leak and fire I can get a extinguisher jet into the base to snuff out any problem


Well pictures paint 1000 words : in a back to front sort of way.... Just the surround to finish now
Attachments
IMG_20191010_193914918_HDR.jpg
IMG_20191010_202342786.jpg
IMG_20191010_202342786.jpg
IMG_20191010_202333614.jpg
IMG_20191010_193115722_HDR.jpg
IMG_20191009_205826530_HDR.jpg
IMG_20191009_193334348_HDR.jpg
IMG_20191008_202550187_HDR.jpg
If your roughing it, Your doing it wrong ;)

Lack of planning on your part doesn't make it an emergency on mine

User avatar
korolev
Posts: 208
Joined: Thu Jul 06, 2017 2:18 am
Location: Land of the South Saxons

Re: bioethanol fireplace

Post by korolev » Fri Oct 11, 2019 11:49 am

Nice work. Does it not need any sort of vent ?

Yorkshire Andy
Posts: 4069
Joined: Thu Oct 03, 2013 4:06 pm

Re: bioethanol fireplace

Post by Yorkshire Andy » Fri Oct 11, 2019 4:17 pm

No totally flu less that said there's the legecy vent from the old back boiler in the living room plus trickle vents in the windows so its not sealed

https://www.easyfire.co.uk/gel-bio-etha ... -explained


That and I've got a co alarm just in case
If your roughing it, Your doing it wrong ;)

Lack of planning on your part doesn't make it an emergency on mine

User avatar
Medusa
Posts: 106
Joined: Sun Jan 24, 2016 8:41 pm
Location: UK

Re: bioethanol fireplace

Post by Medusa » Sat Oct 12, 2019 10:31 pm

Looks pretty impressive :D
Growing old disgracefully!

Yorkshire Andy
Posts: 4069
Joined: Thu Oct 03, 2013 4:06 pm

Re: bioethanol fireplace

Post by Yorkshire Andy » Sun Oct 13, 2019 9:42 am

Seen a few guides saying not to use plasterboard not a clue why as I've been involved in fire testing the stuff and once skimmed no way will it burn had a BIG propane burner heating a sandwich of 12mm gyproc PIR insulation and another 12mm after an hour it the intense flame hadn't penetrated the first layer of board fully
If your roughing it, Your doing it wrong ;)

Lack of planning on your part doesn't make it an emergency on mine

Post Reply