Hi everyone I've just started to use my new equipment .I'm mobile and today I've put up my aerial got my things set up and I can't get it to work...I've done everything in the instructions to get it to work but I'm getting noise...blooming loads of it !!
I don't know whether to wait until the early hours but I've tried high and low plus the 40 channels but I've asked for Rogers but nothing...
I've got a gain master sirio aerial and a psw-30h power supply. Farun fs222 swr meter.
And my 336900n ham radio.
Any advice I'd be grateful for .....
Hi all
Re: Hi all
Welcome to the forum, can't help you on wireless front (ironically as I did it for a living ) but what else are you prepping for ?
Re: Hi all
Not a clue, sorry just wanted to welcome you to the forum!
Re: Hi all
Hello & welcome!
Regarding your noise issue. What cables are you running? Are they shielded? Do you have anything else near by that emits any noise such as a microwave oven/TV (even on standby) also, check the connections on your cables (need to be covered and no single wires showing as that will reduce signal integrity).
Feel free to drop me a PM, If i can offer any further advice etc happy to help out.
Regarding your noise issue. What cables are you running? Are they shielded? Do you have anything else near by that emits any noise such as a microwave oven/TV (even on standby) also, check the connections on your cables (need to be covered and no single wires showing as that will reduce signal integrity).
Feel free to drop me a PM, If i can offer any further advice etc happy to help out.
Prior Planning & Preperation Prevents P*** Poor Performance.
No plan survives first contact.
Bug in before bugging out. Meet the problem on your terms!
No plan survives first contact.
Bug in before bugging out. Meet the problem on your terms!
Re: Hi all
You need to have 10 posts approved before you can PM mate.ChefSimon wrote:Hello & welcome!
Regarding your noise issue. What cables are you running? Are they shielded? Do you have anything else near by that emits any noise such as a microwave oven/TV (even on standby) also, check the connections on your cables (need to be covered and no single wires showing as that will reduce signal integrity).
Feel free to drop me a PM, If i can offer any further advice etc happy to help out.