Page 4 of 4

Re: Winter.

Posted: Wed Sep 05, 2018 9:37 pm
by Outdoorsy
Thanks all! - really helpful advice. I had no idea that you should ease a new stove in gradually - I’ll start with a smaller fire. I’ll probably buy in a few logs for this winter to get us started and then will keep an eye out for local wood/pallets going free. Is there any way to ‘test’ wood for how much moisture it contains before burning?

Re: Winter.

Posted: Thu Sep 06, 2018 12:43 am
by pseudonym
Get yourself a wood moisture detector. :lol: :lol: :lol:

Re: Winter.

Posted: Thu Sep 06, 2018 6:44 am
by jansman
With some experience over time,you will see logs crack open on the ends when dry.They have a certain ' ring' when you tap them with a stick.Wet logs have a dull thud.

Re: Winter.

Posted: Thu Sep 06, 2018 7:17 am
by grenfell
Up to a point you can judge it by how heavy it feels , you build up a sort of intuition combining how a timber feels , looks and even smells. Not as scientific as a moisture detector but something that comes from experience. Diffferent species have different weights of course and different water levels , elm or instance when green is anything up to double the weight of a seasoned piece . I've seen people put soaking wet logs on a fire and it was very clear they were wet. Slower burning , water bubbling from the ends and far more white smoke.
One other thing is to knock up a log store. Doesn't need to be elaborate , just a roof to keep off most of the rain and as open as possible to allow airflow which will dry out timber to the low 20% moisture content. For freshly felled green timber it can just be left outdoors uncovered although preferably off the ground for a year before placing it in the covered store.

Re: Winter.

Posted: Thu Sep 06, 2018 6:05 pm
by jansman
You can buy a meter for less than 6 quid on e bay.Me,being a tightwad,will continue the 'tap test' :lol: